Applied Research, Inc. - The Industrial Specialists

Click on the link to view MSDS info on all our products

ITEM NAME

DESCRIPTION

Aluma-Lube "A"

A clean, clear, general purpose, light duty lubricating oil. Economical solution to many lubricating jobs. Excellent penetration and creep properties. Safe for use on aluminum. Helps prevent adhesion of mortar to aluminum window frames. Includes extension tubes.

Aluma-Lube "B"

Light oil lube, no chlorinated solvents. Use on aluminum, non-silicone.

AR Automatic Transmission Fluid

This ATF meets the requirements of GM Dexron-ll. Ford M2C138-CJ, Ford Type F, Ford M2C166-H, Damler-Benz, Detroit Diesel Allison Type C-3, Caterpillar To-2. Eliminates the need to stock several different types of transmission fluids. Color: Red

AR Cable Lube

AR CABLE LUBE is a heavy-duty lubricant developed for the lubrication and preservation of wire ropes and cables. This product has been formulated with heavy residual base oil and proprietary rust and corrosion inhibitors. It is cut back with a volatile, non-chlorinated solvent for ease of application without heating. Its low viscosity and special wetting properties permit penetration to the core of the wire rope or cable. The solvent evaporates, leaving behind a tough, semi-fluid lubricant in the core and on each wire strand. It clings tenaciously to the surface and is not readily displaced by water. It contains an effective rust inhibitor for further protection. The residual film remains pliable even at low ambient temperatures. Between treatments, lubrication is supplied from the core, which acts as a reservoir to distribute the lubricant to each wire and strand. AR CABLE LUBE will reduce friction and wear between the wires and strands. The coating on the exterior of the cable protects and lubricates the cable and serves as a cushion between the cable and the sheaves or drums.

AR ER 150

Applied Research Gear Compounds EP are multipurpose gear lubricants. They provide good thermal stability, extreme pressure protection, antiwear and demulsibility, oxidation, rust, corrosion control and foam inhibition. Applied Research Gear Compounds EP used in misting systems provide excellent oxidation stability to prevent oil mist deposits. They will form a high volume of mist droplets for transmission to the point of application. Applied Research Gear Compounds EP have minimal stray mist (fog).

AR ER 320

Applied Research Gear Compounds EP meet the requirements of the U.S. Department of Agriculture (USDA) as H2 lubricants for use in federally inspected meat and poultry plants where no food contact will occur. For customers wishing to extend drain intervals and further reduce gear wear, and where water contamination is minimal, Applied Research Ultra Gear Lubricant is recommended. Applied Research Ultra Gear Lubricant can be used in industrial applications where overloading, sever operating conditions, high lubricant operating temperatures, or other problems are encountered. Applied Research Ultra Gear Lubricant has been shown to reduce operating temperatures, power consumption/energy requirements, and failure rates in industrial operating environments.

AR FMG 2

This grease is a High Performance, Multipurpose Food Machinery grease that is white in color, tasteless and water resistant.

AR Food Grade Oil 100 WT/ISO 320 Ultra

Applied Research Food Grade Lubricants are premium performance industrial lubricants, designed for use in the food processing and other sensitive industries where incidental food contact may occur. Applied Research Food Grade Lubricants provide performance well above that found in typical white mineral oils often used in the food industry. They contain a special biocide to prevent growth of molds when the product comes in contact with food or water.

AR Food Grade Oil 140 WT/ISO 460 Ultra

AR Food Grade Oil 90 WT/ISO 220 Ultra

AR Grease Gun in a Can

A special penetrating formula that sprays as a liquid to flush off old contaminated lubricant, creep deeply into working parts and then set up to a viscous, thick grease. Withstands temperatures up to 500F. Highly resistant to water, acid and detergent wash. Includes extension tubes.

AR Jackhammer Oil ISO 150

AR Jackhammer oil will enhance the life of equipment and with stands extreme pressure and heavy shock loads typical of rock drill service, protecting the equipment against rapid wear. It provides tenacious film that clings to lubricated parts. Resists being washed away by trace water in the compressed air. It provides antirust performance and protects critical parts from the corrosive action of wet environments. This product can be used for general purpose lubrication of gears, air tools, in hand oiling and for chain drives, thereby reducing the number of lubricants in inventory. AR Jackhammer oil is designed to give maximum protection to percussion rock drills. They are formulated from highly refined, high viscosity index, paraffinic base stocks and additives, which provide all the performance characteristics, expected of superior rock drill oil. This product is formulated to meet the critical lubrication demands of percussion rock drills. There superior extreme pressure performance provides protection for the rock drill piston, rifle bar and nut against the heavy shock loads typical of rock drill service. The adhesiveness and emulsification tendency of these oils provide a tenacious lubricant film on the rock drill's moving parts which will not be washed off by incidental water that is common in the compressed air which drives the piston in this application. The oils also provide excellent rust and corrosion protection, which is important in light of the corrosive environments in which many rock drill sare used. AR Jackhammer oil contains no chlorinated additives and are completely ashless, minimizing environmental and disposal considerations. Additionally, since rock drills are frequently used in mining environments where ventilation is limited, the low odor and toxicity of these lubricants are added benefits.

AR Jackhammer Oil ISO 320

AR Jackhammer oil will enhance the life of equipment and with stands extreme pressure and heavy shock loads typical of rock drill service, protecting the equipment against rapid wear. It jprovides tenacious film that clings to lubricated parts. Resists being washed away by trace water in the compressed air. It provides antirust performance and protects critical parts from the corrosive action of wet environments. This product can be used for general purpose lubrication of gears, air tools, in hand oiling and for chain drives, thereby reducing the number of lubricants in inventory. AR Jackhammer oil is designed to give maximum protection to percussion rock drills. They are formulated from highly refined, high viscosity index, paraffinic base stocks and additives, which provide all the performance characteristics, expected of superior rock drill oil. This product is formulated to meet the critical lubrication demands of percussion rock drills. There superior extreme jpressure performance provides protection for the rock drill piston, rifle bar and nut against the heavy shock loads typical of rock drill service. The adhesiveness and emulsification tendency of these oils provide a tenacious lubricant film on the rock drill's moving parts which will not be washed off by incidental water that is common in the compressed air which drives the piston in this application. The oils also provide excellent rust and corrosion protection, which is important in light of the corrosive environments in which many rock drill sare used. AR Jackhammer oil contains no chlorinated additives and are completely ashless, minimizing environmental and disposal considerations. Additionally, since rock drills are frequently used in mining environments where ventilation is limited, the low odor and toxicity of these lubricants are added benefits.

AR Petrolatum

This colorless to yellowish-white hydrocarbon mixture obtained by fractional distillation of petroleum, is used for lubrication.

AR Spindle Oil 10

AR Spindle Oil 10 is a premium light-weight synthetic lubricant designed to provide the necessary lubricant requirements of high-speed spindles and bearings on spinning frames and modern industrial equiment. AR Spindle Oil 10 is rust and oxidation inhibited, therefore, it protects surfaces against rust and corrosion, and the product resists oxidation at high temperatures commonly experienced at the lubrication point of high-speed activity. Oxidation resistance, a critical feature, virtually eliminates carbon and varnish formation on the high-speed parts, extending trouble-free operation of both lubricant and equipment. Beacuse of AR Spingle Oil 10's enchanced lubricity and antiwear properties, it reduces friction and component wear, which in turn reduces heat, further enhancing the product's oxidation resistance. AR Spindle Oil 10 is water white and does not contain colored chemicals or additives and is considered non-staining.

AR Transformer Oil SA

AR Transformer Oil SA meet standard specifications required by both ANSI/ASTM D 3487 and NEMA TR-P8-1975 for domestic electrical oil applications. This product has high electrical resistance and is thermally and oxidatively stable. AR Transformer Oil SA is designed for more severe service applications requiring greater oxidation resistance. This product is intended for use in transformers, circuit breakers, oil-filled switches and in X-ray equipment. It has proven product reliability with excellent physical, chemical, and electrical properties, manufactured under stringent quality control procedures. Exceeds the following standards: ANSI/ASTM D 3487, NEMA TR-P8-1975, U.S. Government Military Specification VV-I-530A and Amendment 2 for Class I and Class II fluids and supersedes the Department of the Navy specifications OS-1023, NATO symbol S-756 and British Standard BS 148:1972.

AR Turbine Oil 32

AR Turbine Oil is a long life lubricant with excellent thermal and oxidation stability; it has excellent demulsibility, which assures good lubricant, film strength and reduced wear through quick water separation. AR Turbine Oil will protect surfaces due to the use of an effective rust and corrosion inhibitor. These products excellent properties will allow you to replace other compressor, turbine, and hydraulic oils, as well as gear boxes oils, requiring a nonEP lubricant; thus reducing inventories. AR Turbine Oil provides rust protection, oxidation inhibition, and foam suppression. This product is a good quality lubricant for any application not requiring antiwear or extreme pressure protection. They pass the Fresh Water Corrosion Test (ASTM D 665, Procedure A), and the severe Synthetic Sea Water Test (ASTM D 665, Procedure B). The natural thermal and oxidation stability of these lubricants, due to their high level of refinement, has been further enhanced by their unique additive systems. The high thermal and oxidation stability also reduces the possibility of oxidation deposits or the generation of acidic material from oxidation. AR Turbine Oils are able to withstand relatively high temperature operations for extended periods of time.

AR Ultra Gear Lube Oil 90 WT/ISO 220

Applied Research Ultra Gear Lubricants are excellent for all types of industrial bearings and gears, particularly those operating under severe temperature and load conditions. They provide excellent wear control even in the presence of small amounts of water. Applied Research Ultra Gear Lubricants meet the requirements of: U.S. Steel 224, AGMA 9005 EP. Applied Research Ultra Gear Lubricants are acceptable as lubricants where there is no possibility of food contact (H2) in and around food processing areas. Applied Research Ultra Gear Lubricants are Premium Grade multipurpose Extreme Pressure gear lubricants. Applied Research Ultra Gear Lubricants provide outstanding protection against oxidation, corrosion, and rust protection. These products are ideally suited for gear sets exposed to extremely high temperatures and loads. Tests have proven that they provide a wear protection film 3 to 5 times thicker than a conventional sulfur-phosphorus antiwear film. The inorganic borate film is composed of compounds that do not adversely react with metal. The film forms promptly to provide superior gear protection and improved thermal stability. By minimizing friction, cooler operating temperatures have been observed. This results in longer gear and lubricant life.

Belt-D

An industrial strength spray containing adhesive tackifiers that eliminate and prevent slippage of all types of "V", round and flat belts. Increases pulling power and stops squeals. Will not gum up. Extends belt life and improves efficiency of all belt powered equipment.

Bolt Buster Gel

A high tack, clear lubricating gel which provides lubrication at temperatures from -30 deg F to +600 deg F. Penetrates as an oil to lubrication point, then forms into a tacky grease-like gel depositing a fine Teflon and gel lubricant mixture deep inside working parts. Resists water washout and weathering. Prevents rust and corrosion while covering surfaces with moisture proof barrier film. USDA Rated H2.

Bolt-Buster N.F.

An all purpose, non-flammable, non-conductive mechanic's spray. Penetrates through rust and corrosion to loosen frozen nuts and bolts. Displaces moisture in wet electrical systems. Leaves treated surfaces protected with residual anti-corrosive film. Does not contain any chlorinated solvents. Safe around most plastic and paint. Features a non-flammable spray. Includes extension tubes.

Bolt-Buster Super "A"

A forceful spray, which provides rapid penetration through rust and corrosion to loosen frozen nuts, bolts and mechanical parts. Provides effective lubrication over a broad temperature and pressure range. Safe on aluminum, plastic and paint. Contains Moly and Teflon for superior lubrication and wear reduction. Includes extension tubes.

Bolt Buster "B"

A non flammable all purpose mechanic's spray. A concentrated versatile formulation that prevents rust and corrosion on small equipment tools, cranes, etc. May be dipped, brushed, or sprayed. Treat equipment at end of season to create a weather proof coating that protects equipment from elements when they are not in use. Remove coating with mineral spirits or alkaline cleaner.

CC Wire Rope Lubricant

Penetrates the wire rope to lubricate the core & then dries to a hard film in 20 to 30 minutes to protect the outer surfaces. Moly has been added to provide greater lubrication. Extremely water, rust & corrosion resistant.

CC Moly Lubricant

This is an outstanding, full service, multiple application chain and cable lubricant with moly added for extra protection and longer lasting results. To be used on chains, cables, wire ropes, sprockets, drive chains, hoist chains, drag chains and conveyor chains. Very water and acid resistant. Can be brushed, sprayed, dipped or poured on surfaces.

Chain & Cable Lube Kwik Dri

Rust protective coating with moly that penetrates into core of chain and cable. Lubricates, reduces wear and friction. Fortified with molydenum disulfide to resist high temperature and pressure. Pencil stream spray gets into tight places. USDA Rated H2.

Comp Guard Plus 10W40

This excellent compressor oil is made with synthetic polyalphaolefin & high VI paraffin base oils to far exceed the performance levels of the best petroleum based compressor oils. This is proven by the fact that this oil passes a 5000 hour A.S.T.M. D-943 oxidation test, far superior to results gained with petroleum based oils. It can be recommended for service in reciprocating and rotary/screw compressors.

D-Aqua Lube

A chlorinated, high solvency penetrant that quickly cuts through dirt, rust and scale to creep into parts which have become frozen or encrusted with corrosion. Provides long lasting lubrication reduces friction and will not become dry or brittle. Seals water from treated surfaces. Helps dry out and protect wet electrical gear and other moisture sensitive parts. Non-flammable. Includes extension tubes.

D F I Plus

A multi-functional diesel fuel improver designed to prevent the problems associated with algae, particularly odor, corrosion, plugging and sludge problems. Use 1 gallon of DFI Plus to every 1,000 gallons of fuel. DIESEL and heating oils. EPA registered.

D F X

A modern concentrated fuel conditioner that is specifically engineered to answer the needs of today's high performance engines and is blended to neutralize harmful fuel acids, as well as eliminate the damage caused by sulfur, gum, varnish and moisture found in all fuels. Other advantages: a cleaner more complete combustion, increased mileage, cleans injectors and carburetors, and in general to improve performance reduce downtime and maintenance costs. Recommended for gas, diesel or L.P.G. engines. Typical dilution is 1 gallon of DFX to 200 gallons of fuel. EPA Registered.

DFX Bulk

Dry Moly Lube

A superior, long lasting, extreme condition dry film lubricant and anti-seize coating. Withstands high temperatures and extreme pressures. Provides a dry film lube especially suited for use in dirty or dusty atmospheres. Burnishes into metal to provide long term lubrication and protection. Inert to water, oil, alkalis and acids. Methylene chloride free formula is more user friendly and accepted by safety directors that disapprove of chlorinated solvents.

Engine Guard Oil Conditioner

This improved, highly viscous, oil conditioner that is fortified with superior oxidation inhibitors to lengthen oil life, increase viscosity, reduce blow by, improve compression, decrease wear and oil consumption in internal combustion engines. For general use to obtain maximum results in oils or gear lubes, use at the rate of 1 pint to every 4-5 quarts.

Engine Guard 40 wt

This is an outstanding universal CH-4/CF-2/EO-M/Sj, extended drain, engine oil meets or exceeds all of the specifications for gas or diesel engines. Engineered from top quality base stocks & the best non-shear VI improver.

Engine Guard Plus 15w40

This specially formulated Heavy Duty Motor Oil is ideal for mixed commercial fleets, farm machinery, construction equipment, and marine and other off-highway applications. It can be used for both diesel and gasoline engines. It will keep vital engine parts clean as a result detergent and dispersant additives and provides excellent deposit and sludge control. This multipurpose engine oil is manufactured using selected high viscosity index base oils and additives that provide maximum protection against sludge, varnish, ash deposits, wear, oxidation, foam, corrosion, and rust. Engine Guard Plus Heavy Duty Motor Oil is recommended for four-stroke gasoline engines, and all two-stroke (SAE 40) and four-stroke naturally aspirated, turbocharged, and supercharged diesel engines manufactured before 2007. This Heavy Duty motor oil meets the ECF-1 specification for Caterpillar's ACERT™ engine technology.

Engine Guard S.A.E. 15w30

Superior multi-viscosity passenger car motor oils for domestic and imported cars and light trucks and vans meeting the stringent performance of API SJ and ACEA A3/B3. Also satisfies GM 6049-M, Ford ESE-M2C153-F and Daimler-Chrysler MS 6395G. Engineered for both turbo-charged and naturally aspirated engines.

Engine Guard S.A.E. 15w40

Extreme Impact Grease

This grease is fortified with special additives enabling it to withstand the heavy impact and pounding pressure common to heavy equipment. Our special additive package allows the grease to stay in place and not spatter or pound out of the bearing or fitting. Most greases manufactured today do not have this anti-spatter capability. A non-melt grease with superior water resistance. COLOR: Green. TIMKEN LOAD: 65 NGLI GRADE: 2.5

E.Z. Slip Super Dri

A pure, non-staining super dry, heavy duty, multi-purpose silicone lubricant. Safe for use on almost any surface. Reduces friction and annoying squeaks in hinges, latches, springs, gears and other mechanisms.

Fifth Wheel Grease Color:Black
Available with caulk tube & gun for ease of application.

An extremely tacky grease formulated to adhere to open gears & 5th wheels. This very tenacious product is designed to resist "throw-off" on open gears & will not squeeze off 5th wheels. Water & acid resistant will not melt. NLGI Grade: 2.5. Color: Black

Food Grade Oil 100 ISO

Applied Research's Food Grade Oils are premium performance industrial lubricants, designed for use in the food processing and other sensitive industries where incidental food contact may occur. Applied Research's Food Grade Oils provide performance well above that found in typical white mineral oils often used in the food industry. They contain a special biocide to prevent growth of molds when the product comes in contact with food or water.

Gear Box Lube 680

Applied Research's Cylinder Oils are designed to meet the needs of emulsifying cylinder oils. Applied Research's Cylinder Oils provide excellent metal wettability. The combination of oil emulsibility and metal wetting characteristics result in lower oil consumption rates and improved oil lubricity in the presence of wet steam or water. The metal wetting assures an effective lubricant film on the cylinder walls and pistons of steam pumps and engines, and also provides the oiliness properties which are extremely important in lubricating the sliding worm gear surfaces in worm drive gear cases. ISO 680 Weight Gear Oil.

Graph Lube "A"

A high quality graphite grease of superior lubrication even under extreme temperature conditions from -100° F to +850° F. A non-melting conductive lubricant which is highly adhesive to metals and forms an impenetrable rust and corrosion barrier between harsh atmosphere and exposed surfaces.

Hi Load SAE 140 wt

Extreme pressure, multipurpose gear oils that meet & exceed MIL-L-2105E & API service classifications GL-2-GL-5. Automotive gear oil for use on manual Transmissions, axles, differential & power dividers. Color: Green.

Hi Load SAE 30 WT

Our multipurpose gear oils, with premium quality, paraffin base stocks, are especially formulated for heavy duty requirements. These products are designed to withstand the most severe shock loads, where in most cases, conventional types of lubricants tend to break down and allow metal to metal contact. Our gear oils are specially blended with extreme pressure additivies and adhesive and cohesive agents that make them immediately climb and cling to gears to provide maximum protection. They may be used in virtually all types of enclosed gears.

Hi Load SAE 85-140 wt.

Our multipurpose gear oils, with premium quality, paraffin base stocks, are especially formulated for heavy duty requirements. These products are designed to withstand the most severe shock loads. They are specially blended with extreme pressure additives and adhesive and cohesive agents that make the gear oil immediately climb and cling to provide maximum protection. The gear oil is non-foaming, and will not mix and emulsify with water. May be used in virtually all types of enclosed gears and meets GL-5 requirements.

Hi-Load SAE 90 wt

Hi Load Gear Oil ISO 220 is a multipurpose gear lubricant and has been formulated with highly refined, high viscosity index paraffinic base oils and a new generation sulfur phosphorus additive system. This product contains extreme pressure, antiwear and emulsibility additivies; oxidation, rust, corrosion and foam inhibitors and a metal deactivator to protect copper or copper alloys from corrosion. It has specifically designed to meet or exceed the performance requirements of Joy Technologies specification for transmission oils.

High Temp Guard

This synthetic blend grease is specially formulated for high temperature bearing applications up to 1100°F. This product is fortified with Molybdenum Disulfide, graphite, and aluminum. It has a low-gumming base and no Dropping Point so it will not run out when heated. COLOR: Metallic Silver. NLGI GRADE: 2. USDA: H2.

Hydro Guard 30wt

Contains an effective antiwear additive to control wear in industrial gear sets, passes ASTM D 665A and B rust test in both fresh and salt water. Contains a corrosion inhibitor to neutralize material which could cause metal surfaces to rust or corrode. Resists thermal oxidation and viscosity increase, providing long lubricant life and operates industrial gears and circulating oil systems with maximum oil film strength and no entrained air.

Hydro Guard SAE 10/32 ISO wt

Our anti-wear hydraulic oils represent the most advanced blend of highly refined paraffin based oils and special additives to assure long oil life under heavy-duty applications. These products are specially formulated with high viscosity index based stocks and anti-wear additives to give excellent temperature and oxidation stability, and to provide maximum protection of systems. Our oils offer excellent rust and corrosion protection down to -35°F.

Hydro Guard SAE 20/46 ISO wt

Hydro Guard SAE 20/ISO 68 wt

Premium quality antiwear hydraulic oils that does not foam. R&O inhibited & high performance. Color: Green

Hydro Guard+ 10W40

Top hydraulic oil in our industry. Special additive package used "Hydro Guard+" resulted in 5000+ hours performance on ASTM D943 oxidation test more than doubled the life of other petroleum base hydraulic oils. Color: Amber

Lith Guard Plus

A premium quality, multipurpose grease with an operating range of -40°F to 510°F. 60 Timken load. NLGI Grade 2. Color: Blue. USDA: H2.

Maxi-Lube

Air Operated Greasing System. Fits 120 lb. Grease pail. Up to 10,000 PSI

Mini-Lube

Portable Grease gun, Fits 7 lb. Can. Up to 10,000 PSI

Moly Guard

Our highest quality premium grade grease. The molybdenum disulfide in our product reduces friction and protects against excessive wear from extreme loads. Its extra load-carrying capabilities are indicated by its Timken Load of 65 - one of the highest in our industry. It lasts longer than many conventional greases, as the Moly actually "plates out" on the metal surfaces, reducing friction and extending the lubrication cycle. Fortified with tackifiers, corrosion and oxidation inhibitors. COLOR: Grey/Black TIMKEN LOAD: 65 NLGI GRADE: 2 USDA: H2

MPG-AA "A"

This formula has the highest USDA authorization for a lubricant with food contact. A high viscosity, high temperature grease specially formulated for the food packaging and pharmaceutical industry. Protects equipment against rust, oxidation and wear. Resists throw off, shear breakdown and water and detergent wash out.

MPG Black

MPG Black Greases EP provide outstanding film strength and adhesive properties. As a result, these products are particularly effective in providing superior wear protection in heavily loaded and shock load conditions. MPG Black Greases EP stays in place, sticking to bearing surfaces and, thus, provide excellent lubrication under a wide range of operating conditions. They perform particularly well in roller bearings. They offer excellent water resistance and will not wash off surfaces. The rust inhibitors effectively protect bearing surfaces against corrosion. Pump ability is excellent over a wide range of temperatures as indicated by the Lincoln ventmeter test and the relatively low pressure drop in piping. Oxidation inhibitors ensure long life in storage and in use.

MPG Red Guard

This is an excellent non-melt grease specially formulated with extreme pressure and anti-wear additives to provide heavy duty service. This product has extra tackifiers to provide excellent adhesive and cohesive properties. It resists most acids, salt, dirt, salt spray, steam, corrosion and oxidation. COLOR: Red TIMKEN LOAD: 65 NLGI GRADE: 1 and 2 USDA: H2

MPG/White Guard

MPG White Guard (with PTFE). Finest food grease available. Fortified with E P, antiwear, rust and oxidation additives. P T F E increases lubricity and reduces friction. Contains extra tackifiers and is very water resistant. .500° F dropping point. 40 Timken load. NLGI Grade: 2. USDA: H1

No Seize

This is a metallic silver high temperature grease designed to provide high temp protection up to 2100°F. The advanced formula is comprised of graphite and aluminum blended into a synthetic base to protect metal parts under extreme conditions of pressure and heat. It also reduces corrosion, pitting, rusting and galling of metal parts. COLOR: Metallic Silver NLGI GRADE: 1 USDA: H2

Sani-Lube "A"

Non-silicone, food grade oil lubricant oil authorized by USDA for incidental food contact. Lubricates rings, pistons and bearings. Provides a highly water-resistant, anti-rust film coating on all equipment surfaces. Clean, sanitary and moisture free. USDA Rated H-1.

Super Lube

Larger version of Mini-Lube. Fits 45 lb. Grease pail. Up to 10,000 PSI

Tap-Ease "A"

A clear, synthetic coolant and lubricant designed to disperse heat and extend tool life. Convenient aerosol is handy for field operations. Works on exotic metals. Non-irritating to the skin. Transparent fluid provide clear view of work area. Includes extension tubes.

T_F Guard

A new E.P. grease containing the friction reducing additive "P.T.F.E.". This provides added protection by preventing metal to metal contact and increasing lubricity, thus reducing friction & wear. All-purpose non-melt. Timken Load 50. Color: White USDA: H2

True-Open-Gear Kwik Dri

A high tack lubricant which prenetrates deep into gear teeth and cable before thickening to a heavy black stringy lubricant. Automatically re-coats gear teeth with each revolution of the mechanism. Contains high wear resistance additives to prevent viscosity breakdown and spin-off. Unique dual spray valve - pencil or fan spray.

Vacum Pump Oil

Premium quality low volatility vacuum pump oil.

White-Ease "A"

Non-chlorinated, all weather, multi-purpose penetrating grease. Dispenses a thick long lasting, water resistant grease with corrosion inhibiting properties. Protects parts against friction damage and wear. Provides a clean lubricating film. Resists heat to 350F. USDA Rated H2

EQUIPMENT
Acid Sprayer	A plastic co-polymer stress & crack resistant tank. ABS Chemical resistant pump tube, threaded cap closure, PVC shut-off valve with extension, 42" hose And adjustable nozzle.
AR Flex-Gun	An ideal cartridge gun. This rugged, precision engineered grease gun is designed for easy single handed operation. Equipped with flexible hose for hard to reach zerks. Up to 7,000 p.s.i.
AR Flexible Extension Hose 13"	Flexible push-on extension hose used to reach hard to get "zerks." Grease resistant hose with 10,000 psi burst rating. Designed to fit all our greasing systems.
AR KY Coupler	Standard coupler that fits all guns.
Drum Pump - Plastic	Adjustable pump for solvents.
Drum Pump - Steel	Adjustable pump for solvents.
Drum Pump Steel	Metal drum pump for use only with 55, 35, 30 & 20 gal. drums
Drum Spigot 2"	2" Flo-King Facet Gold Color
Drum Spigot 3/4"	3/4" Flo-King Facet White Color
Econo-Spray	Compressed air, one liter, high density sprayer. adjustable tip--mist to stream.
Flexible Extension Hose 13"	Flexible push-on extension hose used to reach hard to get "zerks." Grease resistant hose with 10,000 psi burst rating. Designed to fit all our greasing systems.
Maxi-Lube 120	Same greasing system as the Maxi-Lube 45, except this equipment is designed to fit the 120 lb. grease drum.
Mini-Lube	A totally unique greasing system. This portable grease gun fits 7 lb. grease can. Easy to operate simply push down on the pump with hand or foot for 30 grease shots. 6 ft. flexible hose with 360 degrees swivel. Generates 10,000 psi.
Plastic Sprayer	Co-polymer tank, threaded ABS cap closure, ABS pump tube, contoured shut-off, adjustable nozzle, 3/8 reinforced 32" braided hose. Top quality general purpose sprayer.
Push Down 1 Gallon Dispenser
Saftey Solvent Sprayer	9"Pump, 8"Extension. Stainless steel tank with vitron gasket and brass "no-drip" shut-off valve. Special clear plastic braided hose specially made to handle safety solvents.
Spigot
Spraymaster "The Ultimate Srayer"	This sprayer is guaranteed for 5 years. It is chemically resistant, it stands up to solvents & acid. Use it with all types of cleaners, degreasers, weed killers, pesticides, strippers, etc. Blasts away dirt & grime. Graduated opaque bottle.
Trigger Sprayer	Trigger for spray bottle.