IRRIGATION FOR YOUR GARDEN

IRRIGATION FOR YOUR GARDEN

It is not fun to work with dried-out plants, particularly when gardening is already a lengthy task. The right irrigation is crucial to keep your garden in top condition all year round. Here are some tips to make the most the irrigation systems you have

1) Plan Ahead

It’s crucial to think about your irrigation system prior to when you begin planting. Think about the size and shape of your garden along with the kind of plants you’re planning to plant. You’ll also have to decide which direction you’d like the water to go , or directly towards the plants, or to the pond nearby or some other features in the landscape.

2) Use Mulch

Mulch keeps moisture in the soil therefore, it is recommended to use it in a generous manner on your garden. It is possible to use organic or inorganic mulches but you must select a mulch that breaks into smaller pieces over time, like straw. If you’re considering adding irrigation channels to your current garden, you might need to get rid of some mulch before digging trenches for the irrigation system.

3) Keep it Clean

It’s essential to wash all irrigation systems and sprinklers on a regular basis to ensure that they work as they’re needed. We have replacement parts available for our majority of irrigation products. If one part becomes blocked with dirt or mineral deposits then you can replace it instead of needing to purchase a new system.

4) Use Timers & Controllers

If you can, install automated timers and controllers in the irrigation systems you have. A timer will make sure that the system is turned to a stop only when you require it, while a controller can safeguard the plants against damage caused by excessive watering.

5) Check Your Equipment

Check all sprinklers, nozzles as well as other equipment for irrigation at least once each week during hot weather and every 2 weeks during cooler temperatures. This is also a great time to clear any dirt that has accumulated in the system. Also, make sure you examine the pressure of water throughout the system. If the pressure is too low then you might need to replace certain components of the system with bigger ones to increase the efficiency of water flow.

6) Use Water Wisely

The most effective irrigation systems can only be dependent on how they are utilized. It is important to adjust your watering schedule according to the needs and make sure to water only in the morning or the evening hours, when temperatures are lower. Keep in mind that plants do not require to be watered every day. Most require 1-2 inches of water each week, based on the conditions and the soil kind.

With just a little planning and care with a little planning and maintenance, you can build your own irrigation scheme that keeps your garden looking stunning throughout the year. For more information or assistance on selecting the ideal system to meet your needs Contact us today. We’re always ready to assist!

IRRIGATION METHODS

Sprinklers are the most popular method of irrigation and are suitable for all kinds of gardens. They operate through spraying fine mist across an area of a particular size, which is why they’re ideal for irrigation of big areas, or even trees. Spray heads are available in two kinds that are oscillating and rotating. Oscillating head move forward and back, while rotating heads rotate in a circular fashion. Both models come with nozzles that can be adjusted, so you can alter the flow of water to suit your requirements.

Another kind that sprinklers are the rotor, that is specifically designed for spraying water across a considerable distance. This kind of sprinkler is ideal for large fields or gardens that require covering an extensive area quickly.

If you’re only able to manage a small backyard, drip irrigation might be a better choice. This method is a method of slowly release of water directly to root of the plants, which means it’s more effective than other methods and could reduce your water bills. Drip irrigation comes in two forms that are micro-irrigation as well as trickle irrigation. Micro-irrigation is a method of delivering a small volume of liquid directly into the soil via tiny tubes and trickle irrigation utilizes emitters to direct the flow of water into the soil.

Whatever kind of garden you’re in, it’s crucial to properly water it by using the correct method. We at Sprinkler Supplies Co., we provide a variety of irrigation equipment and sprinklers that will meet your requirements. We also have replacement parts and accessories to keep your system in top functioning all year round. Contact us now for more details!

AUTOMATIC IRRIGATION EQUIPMENT

The most popular kind of irrigation system that is automated includes a timer. Timers can be set up to turn on at specific dates of the day which means you can water your garden and not have to think about it.

Another kind of automated irrigation equipment is called a controller. Controllers function by detecting soil’s moisture levels and then shut down the system once it reaches the limit set by a predetermined. This will prevent over-watering which could cause damage to the plants.

Timers and controllers can be purchased in AC or battery powered models, which means you can select the one that suits your requirements best.

OTHER IRRIGATION EQUIPMENT

Other kinds of irrigation equipment comprise sprinklers, nozzles, as well as heads for rotors. Sprinklers come in two kinds that are commercial and impact. Commercial sprinklers are able to be adjusted to alter how much flow is produced, but impact sprinklers aren’t able to be adjusted. They are specifically designed for certain kinds of structures like flowers or shrubs. Rotor heads spread water over large areas using rotating arms.

Automated irrigation systems vary in their complexity based on the level of control you wish to have in your irrigation systems as well as the type of equipment they have. Certain systems only turn on when you’re in need of they, while some have a controller that checks the levels of moisture within the soil, and water your garden automatically when needed. More control over the irrigation systems you use the simpler it will be to reduce time and cost on your water bills!

  • Timers
  • Controllers
  • Valves

Timers

The most commonly used type of automatic irrigation device includes a timer. The timer can be programmed to turn on at certain dates of the day to allow you to sprinkle your garden with no need to think about it.

Controllers

Use controllers. They function by detecting the levels of moisture in the soil. They will shut off the system when it has reached a set limit. This stops over-watering, which could harm the plants.

Timers and controllers can be purchased in AC- or battery-powered versions So you can pick the one that best suits your requirements best.

Valves

Valves are used to regulate the water flow in an irrigation device. They are either automated or manual, based on the level of control you would like to have over the system.

WATER COLLECTION SYSTEMS

Water collection systems are employed to collect rain runoff, and keep it in storage for irrigation purposes.

If you are choosing a location that will be a water storage system ensure that the site is higher than the garden, so that gravity pulls the water downwards. Keep in mind the areas you’ll require access to the system. You might require digging more soil from certain regions if they’re higher the rest of the area. Make sure you mark any plants or trees that are within the access to your new system to ensure that you don’t end up damaging the plants while digging!

After you have your location chosen, draw an area of stakes or bricks along its edges. This will assist in containing the dirt as you begin digging. Create a trench near the gravel bed you laid out. Make sure that you leave enough space to the sides to accommodate the PVC pipe.

Polymer tubing

Now is the time to put down the polymer tubing. Start at the side of the trench and continue to lay it in place until you get to the other side , or the row that you’ll plant seeds and seedlings. Once you’ve reached the next row and cut an X in the fabric to allow water to flow freely through it without resistance. It’s crucial that each piece of tubing is at or below the ground because otherwise it will not drain correctly. You can also utilize rebar stakes for holding the tubing in place however, be sure to remove the stakes prior to planting!

It’s now time to fill the trench with backfill and ensure that you pack the soil in tightly while you work.

The final stage is connecting your PVC tube to the other end of the polymer tubing. You could use a T connector to do this. If you have enough space, you can utilize a Y connector and connect to two sections made of PVC pipe. Once your Water collection device is completed. All you have be doing is to connect the system to the faucet and start the water!

When choosing the location to install your system of water collecting. It is important to ensure that the site is less than your garden to ensure gravity will be able to draw the water downwards.

Leave a Reply

Your email address will not be published.